Home > Event Id > Event Id 1054 Cannot Obtain The Domain Controller Name

Event Id 1054 Cannot Obtain The Domain Controller Name


Something odd was happening in the DNS configuration. We began to see this event every 5 minutes continuously whether a user was logged on or not. w2k client - no problem How resolve this problems? doing nslookup server00-dc and these are my results*** Can't find server name for address Non-existent domain*** Default servers are not availableServer: UnKnownAddress: server00-dc.Address: also tried my secondary DC Check This Out

Press OK. Preventive M… Windows XP Fix for unstable cursor in Windows XP Article by: CSOPS1 Issue: Unstable cursor in Windows XP and Windows runs extremely slow in that any click will bring Then finally, the GPO was applied just as for the other PCs. We also disabled the DHCPMediaSense feature.In the end, after looking very closely at the firewall logs, it appears that the firewall product that we were using was dropping ICMP packets larger

Event Id 1054 Group Policy

x 2 Anonymous In our particular environment we had a 2003/XP computer separated from the 2003 DC over a VPN. As for the GPO, I did add two settings in the Registry (FOR LOCAL ADMINISTRATOR, the same user i did the Wireless setup for): [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System] "GroupPolicyMinTransferRate"=dword:00000000 Windows Registry Editor Version 5.00 so it's best to take some preventive actions so that we can avoid such issues or overcome such problems more easily. can you save all of your firewall rules to a file, then remove all of the rules from the firewall , create a new rule allowing all traffic in both directions

  • Sponsored Links Alexey 4.
  • After applying the policy without blocking ICMP, everything started working again.
  • After I set the policy to "Not Configured", the suspect rules in Windows Firewall disappeared, and I am now able to ping the DC.

{{offlineMessage}} Try Microsoft Edge, a fast and secure browser that's designed for Windows 10 Get started Store Store home Devices Microsoft Surface PCs & tablets Xbox Virtual reality Accessories Windows phone I think that kerberous or/and ipsec problem.... The problem was caused by the fact that the server's NIC was configured for IPSec. Event Id 1054 Error Code 58 Log onto the new domain controller with a user account t… Windows Server 2008 Active Directory Advertise Here 658 members asked questions and received personalized solutions in the past 7 days.

There is also another update direct from Microsoft referring to a known issue with the AMD PowerNow! x 6 Dave B I have this problem with a Wireless LAN card. See ME910206 for information on how to do that. https://support.microsoft.com/en-us/kb/326152 Community Sponsors Advertisement WindowsITPro.com Windows Exchange Server SharePoint Virtualization Cloud Systems Management Site Features Contact Us Awards Community Sponsors Media Center RSS Sitemap Site Archive View Mobile Site Penton Privacy Policy

If you're looking for how to monitor bandwidth using netflow or packet s… Network Analysis Networking Network Management Paessler Network Operations How OnPage integrates into ConnectWise Video by: Adam C. Windows Could Not Obtain The Name Of A Domain Controller Server 2012 On the other hand rejoining solves the problem (thanks to MikeRuralElectric). x 2 Anonymous I had this problem on two Win2k3 member servers and resolved it by disjoining the domain, then re-joining the domain. JSI Tip 10278.

Event Id 1054 Windows 2008 R2

The reason you do not see a problem with all NICs is because some never perform a reset. Serrano Mar 15, 2011 ipcm Manufacturing, 101-250 Employees Sometimes just check the cables like i do. Event Id 1054 Group Policy By miketkelly · 8 years ago I've been having a problem with one of my client computers. Event Id 1054 Windows 2012 This firewall was blocking all the connections via, so the Netlogon service was not able to communicate.

Make sure the workstation is "pointing" to the local DNS server (domain controller) in the TCP/IP settings. his comment is here While on some XP machines, it is possible that "Obtain a DNS server automatically" might be checked, on all server machines and the vast majority of workstations, the correct DNS address If you are not a registered user on Windows IT Pro, click Register. x 97 Anonymous In my case, this problem occurred because a traditional ping between this server and the DC was stopped by the firewall. Event Id 1054 Group Policy Windows 2008 R2

This event occurred together with Event ID 14 from source W32Time, Event ID 29 from source W32Time and Event ID 5719 from source NETLOGON. See ME840669 to resolve this problem. After creating this policy you'd have to do a gpupdate /force on the machine having this since it isn't pulling policy. this contact form Comments: Anonymous In my case, this error along with some failing dcdiag tests (like advertising) were caused by the _msdcs zone in DNS having mysteriously disappeared!?!

JSI Tip 5417. Event Id 5719 See ME555381 for information on how to configure the Windows 2003 SP1 firewall for a Domain Controller. The "Windows Firewall: Allow ICMP exceptions" policy was set to "Disabled".

This issue is probably present on non-DC servers and Windows XP-based clients as well.

x 3 Christophe Derdeyn I had a W2K3 SBS2003 with 2 NICs, one connected to the Internet and the other to our Intranet. x 2 Anonymous I was running ZoneAlarm and it had denied access to the Windows Logon Module. It appeared right after I changed a Domain. The Processing Of Group Policy Failed Windows Could Not Obtain The Name Of A Domain Controller Also, see ME933458, ME938448 and the links to "Fixing Scripts policy settings problems", "Troubleshooting network problems", WITP76721 and WITP79264 for additional information on this event.

Please remember to be considerate of other members. I see you have tried the GPO "fix". I'd like to see you "point" the workstation to the domain controller in the tcp/ip settings. navigate here If the TCP/IP protocol registers with NDIS before the network adaptor driver, for a short time it prompts higher user mode networking components that network connectivity is not available.

Click Internet Protocol (TCP/IP), and then click Properties. Enabling the Userenv debug mode (as described in some of the other posts) showed the following behavior: USERENV(20c.aa4) 14:20:57:242 PingComputer: First and second times match. Connect with top rated Experts 10 Experts available now in Live! From a newsgroup post: "All computers must point to the DS for DNS resolution.

Your Windows Server 2003 domain controller records Event ID 6702 when you use a single-label domain name? Anaheim Apr 6, 2010 ATScuba Manufacturing, 1-50 Employees I keep having this issue on my DC - most of the other machines on the network don't ever report it - but This causes the spurious ping times, and causes problem for GPO transfer rate calculations (hence Christophe Derdeyn's solution) You can read more about this issue in this blog by the Active Stats Reported 7 years ago 11 Comments 21,850 Views Other sources for 1054 Microsoft-Windows-GroupPolicy Software Licensing Service DhcpServer Trend Micro Security Server Server Administrator NetDocuments Local Document Server flcdlock Others from

x 1 Anonymous If you're using DHCP, make sure the DNS Server option (006) is set in your scope options. Solved Userenv Event ID 1054, Windows cannot obtain the domain controller name for your computer netowkr. Also, and entry in the host file (c:\windows\system32\drivers\hosts) pointing to that same server would also make sure it was not getting conflicting information from another device on the network. You can fix this by forcing Windows to use the PM timer for QueryPerformanceCounter.

x 4 Anonymous I encountered this problem on my DC. New computers are added to the network with the understanding that they will be taken care of by the admins. If we can then we simply add the rules back one by one until we find the one that is causing the issue. x 239 Anonymous My problem was an old entry in _msdcs under my domain (an old DNS server was configured).

Good to go now, thanks! 0 Featured Post Ransomware-A Revenue Bonanza for Service Providers Promoted by Acronis Ransomware – malware that gets on your customers’ computers, encrypts their data, and extorts Most switches will run the Spanning Tree Protocol (STP) to detect network loops and shut down any ports with a loop. In our case, the problem occured due to Group Policy settings pulled across a VPN. W2K and XP both require an accurate DNS server that accepts active updates.

Nuo Guest July 5th,08:04 AM #3 Re: Windows cannot obtain the domain controller name (userenv, id = 1054) Thanks for attention. There is a windows update specific to this issue that may correct this and or links to the utility at http://developer.amd.com/wordpress/media/2012/10/TSC_Dual-Core_Utility.pdf.